News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

SceneScapes Mixing Hopper #35101

Started by ncng87, August 31, 2019, 06:59:39 PM

Previous topic - Next topic

ncng87

I just received an HO SceneScapes Mixing Hopper.  I must say it is of rather poor quality. 

1.  There are 4 resin corner pieces that hold up the top tank.  Three of the corner pieces had fallen out and the tank had come unglued from the 4th one.

2.  Whatever glue was used to assemble the building has caused the joints to corrode.

3.  It appears that there is supposed to be a door or opening in the back of the building.  The metal has shallow indentations where the opening should be and the bottom metal "foundation" is missing.

I also purchased 3 other buildings in the series that should go with this mixing hopper.  It would be nice if there was some picture or diagram that illustrates how all these buildings would be used together in a scene.

ncng87


Trainman203

Sounds like standard modeling skills from the past, or those of kit bashing of today, are applicable here.