News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

using ez command with dc powered track switches

Started by kh25, October 07, 2015, 07:04:06 PM

Previous topic - Next topic

kh25

hello i currently have the ez command controller wired to the layout , i created my own walk around cable with it and once i get my sound equipped gp7 i'm swapping over to the ez dcc comand using the same cable, my question is im going to be using normal dc snap switches, am i able to use a dc pack to operate the switch machine or am i able to run the switch machine wires to the ac terminals on the ez command?
thanks
mark

hawaiiho

Since the DCC controller has no AC assy output,  hook up the DCC  to the track as instructed and just continue to use your current DC comand controller's AC accy output  to power the switch, just as you do currently.

Works fine.

Will

jbrock27

Yes, you can use a DC pack to run the switch machines and use either the AC or the DC terminals to power the machines.  They don't care which type of voltage it is, just how much.  Don't top 19 volts going to the switch machine(s).
Keep Calm and Carry On