News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

connecting tracks to #5 turnout

Started by whizamit, April 09, 2011, 04:12:22 AM

Previous topic - Next topic

whizamit

I recently purchased a #5 turnout and am wondering how to connect track to the straight and side section of the turnout at the same time. The two pieces of the track overlap and dont fit. Any suggestions?

mf5117

#1
should be a short piece of track that came with the #5 "2 1/4 inch long" .look underneath and you will see a score .gently remove the angle "tapered score" .install this piece on the diversion part of the turnout and install track accordingly

wolli_V200

Hi, same problem. Tracks and turnouts.. No sign where to cut????
I found this in an older answer
should be a short piece of track that came with the #5 "2 1/4 inch long" .look underneath and you will see a score .gently remove the angle "tapered score" .install this piece on the diversion part of the turnout and install track accordingly

thanks
wolli

Len

If you don't want to use the included short track section, you have to mark and trim whatever track you do use in the same manner.

Len
If at first you don't succeed, throw it in the spare parts box.

wolli_V200

thank you. Over the years I forget these simple tricks .
My old Maerklin tracks doesn't need a cut ;-)

wolli_V200