News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Replacement gears for a Baldwin 2-4-2

Started by Jeffb, February 11, 2011, 12:22:59 PM

Previous topic - Next topic

Jeffb

Been given an old non running  2-4-2 Baldwin- White Pass and Yukon -- number 9 tender loco part no 91119.
Motor is ok but the idler gears are missing. Are they available anywhere???

Jeff B

richg

Did you check the Parts & Service page?

Rich

jsmvmd

Dear Jeff,

Not sure of your skill level (Mine is basic, at best), but what about replacing the drive train with an after-market unit ?  The question is do they exist.  My Aristo Rogers 2-4-2 runs like a charm.  Perhaps the Aristo drive train could be installed in your Columbia (?) .

Any suggestions from Loco Bill or Wade Colyer ?

Would Micro-Mark have gears you might be able to cobble up ?  Just a thought.

Best Wishes,

Jack

jsmvmd

Sorry,

I meant to include this link for those interested.

http://www.squidoo.com/model-train-repair

Best Wishes,

Jack

Doneldon

#4
jeff-

The parts page doesn't show the 2-4-2 mechanism but perhaps the 4-4-0 unit will work. Also, call service even though the parts page doesn't show the Columbia parts. (It's a long out of production locomotive.) I sent one in a couple of years ago and they put it all back in order. If that all fails, contact Northwest Short Line. They have tons of gears and motors as well as expertise.  Good luck.

                                                                                                                 -- D

jsmvmd

Dear Jeff and Don,

Thanks to Don for mentioning NSWL.  Here is a link to their page that lists the gears:

http://shop.osorail.com/category.sc?categoryId=44

Hope this helps !

Best Wishes,

Jack

Jeffb

Gents, many thanks for your suggestions. I am waiting for a gog from bachman on a chance it might fit. If not i shall be chasing up your contacts- many Thanks
Jeff B