4-6-0 Socket

[Loco Bill Canelos]

Hi Bach-man,

Is the decoder socket in the 4-6-0 exactly the same as the ones in the C-19 and K-27  While I believe it is I just want to be sure in case I need to give advice concerning sockets.

Thanks, Bill

[mickeykelley]

It is supposed to be.  If you order the pigtail board for wiring your own control, it is the exact same board for all of them.  I did that and verified it.  So that tells me they are all the same. But I'm no expert so would be nice if the Mann confirms it.

[Greg Elmassian]

Well, it does show the adapter board in the manual.
The user's manual shows the pin connections
so, if you use the adapter board, then you have the connections labelled...

Is it the same as the C19? Yep... is it the same as the K-27, well there were some where the chuff logic was inverted I believe...

But you have the 2-6-0, so that is immaterial..

Greg