ok ill have to read that a few more time right now its time for bed so ill read it in the morning.

thank you.

KRIS

The switches are AC power not DC you need to have something with an output of 16vac at 1000ma.

VAC = Volts Alternating current
MA = Milli-amps
DC = Direct Current

A wall-wart would work for just what you need you can find them at radio shack.

ok i got a really cheap way to fix your problem and any body that runs on 22v volts can do this.

Warning this dose involve the use of electricity!!
1. turn off power the the outlet
2. take off the face plate and take the outlet out of the box
their should be 4 wires a red one a black one a white one and a green or copper one
remove the wires from the outlet.
3. dose your outlet look like this? http://www.gwarreninc.com/images/safety-hazards/large/safe-grounded-three-prong-outlet-21ae.jpg if not get one.
4. reattach the black and white and green wires to the outlet

You now have 110 volts at your ready

Just to clue you in i am studying to be an electrician so im not talking out my rear on this one.


P.S.

if you don't have a white wire goto your local home center get the length you need and run the wire back to your main panel. turnoff the main breaker and take off the panel cover run the white wire to where either the white wires are or where your copper or green wires are. put everything back.

mark the outlet that it is 110 not 220.  should cost about 10.00 or less.


let us know how you do

KRIS

http://i956.photobucket.com/albums/ae45/trainboy16/brainspirt1withmarkups001.jpg

hope you can see this well  enough if not let me know and ill make a better one

i need to know where the other iso track need to go to avoid making a short.

which one would be better this idea or the helix?

if you could help me out it would help a bunch
    thank you
KRIS


HAPPY NEW YEARS EVE

ok now that i got my brain working again.
i have got a question.

will atlas's code 100 rail joiner and bachmann's track be compatible or will i have to get some universal rail joiners?
also can you cut the flextrack?

please let me know.

Kris

HAPPY NEW YEARS EVE

i have about a 3 or 4% grade slope that's open and it works great no probs for any of my engines w/ or w/o loads, however that is 26"rad curve also.

you have come to the right place however it depends what you are looking for a really basic set or one with a whole bunch of neat features Like Dcc?

nope look at pic

i just had an idea though. let me get back to you on that.


ok this is what i have

do i have the iso tracks in the right place to do a reverse loop

lacking the control box.

http://i956.photobucket.com/albums/ae45/trainboy16/brainspirt1.jpg

using anyrail

i have yes but they would be going in the wrong direction

they might have i just don't know where to find them

well the trains are going to be only engines  anyways i have another way to get Trains down to the yard i just need a way to get them back up that my problem.

yes i know but they are out of stock their i have a few sources that i can poke and see what falls but they are code 83 it would be nice if i could find something in code 100 if possible.



if any one wants to know what code is before they ask go here.

http://www.bachmanntrains.com/home-usa/board/index.php/topic,13724.0.html

last 2 pages

you would probably have to find something locally but the output voltage is 16vac amp is 1000ma (mil-amps)

vac (volts Alternating Current)

for what?