HI RICHG

thanks for the reply

will be my 1st SOUND IMPLANT, have done decoders B4, not really wishing to do after seeing the PARTS LIST with the Loco, but friend/owner is LESS KEEN to do

It runs well on DCC now and is HO and have just got the SMOKE to work, even though VERY WISPY, but happy its SMOKING out of the right place - so might chase up in HO FORUM

mm - Bad eyes, - BIG Fingers, - know nothing about how to open - so far not really people friendly, other than running on HO DCC with some Smoke, - one out of 4 is - up the Creek without a paddle

back to the drawing board

HI ALL
I am looking for HELP to install a Sound Decoder to a 060 Steam Loco, Smoke, and Sloping Tender, the Explode view of the Loco that came with the LOCO and SLOPE Tender, does not help me all the much - NEED TO KNOW how to start to open the LOCO to install a Decoder and now have any SPARE PARTS LEFT OVER

take this piece then this piece to finally get inside  "NOTES/EXPLODED VIEW" would be handy

THANKS FOR LOOKING

HI ALL

now have the 2 Bachmann points to a number - NOTEs were very confusing but then again it may have been me

bfn kiwi42

HI
I have a friends PARAGON2 EMD Switcher that he was having trouble to run - I have been able to Lower the MAIN volume via CV133 from FACTORY SETTING of 128, now down to 85 and enter and now more pleasant to hear in a open room, would be very quiet in a EXPO area, more likely reset it to 128, but friend is more likely not taking to a EXPO


bfn kiwi42

THANKS VERY MUCH

however I have now read this PDF, and remembered that he had a problem with his 1st Controller DYNAMAS Controller, changed over to a MRC Controller, got most other thing working but the points, so another now problem arrives, will try my Club Members for an E-Z Command Controller

Pg 2 has "Turnout Operation with an NMRA-Compliant DCC Controller", which nearly clears up his problem

HI all

I have 2 DCC Bachmann points here from a friend that needs to know how to install to his layout, is there install instructions around please or will someone be kind enough to write back.

thanks kiwi42