Thanks for clarifying that Rich. I'll be going to the hobby shop I guess.

I've recently bought a used Bachmann DCC Equipped loco, that I think has been programmed on another DCC system to disable the analog mode, and given a 4 digit address. I'd like to try to reset the Bachmann Decoder to it's default settings. Is this possible with EZ Command?

Thanks guys. I think you are right about the address being changed, and the analog function disabled.  Unfortunately, I only have the Bachmann EZ Command system, and I don't believe it can reset the decoder. (The Bach Man can correct me if I'm wrong)

I'm not in a club, and don't have any friends who are into model railroading. I'll try my local model railroad shop. He's a digitrax dealer and should be able to reset it for me.

I need some advice on trouble shooting. I just bought a Bachmann DCC Equipped GP-35 off of ebay. The seller, who has a reputable record, says that it was running fine. However, when I received it and placed it on my layout I couldn't get it to work.

Here's some of the basics:
1.) Tried the engine on DC... no response. No engine noise, no lights.
2.) Tried the engine on the Bachmann Command Control DCC, address #3. Again, nothing.
3.) No visible damage to the engine or packaging. In fact, it was very well packed in the shipping box.
4.) Opened the engine up, no detached wires, or broken solder connections.
5.) Gears are well lubed, and wheels are free of corrosion or oxidation.
6.) Trucks are in good shape, and wire seem to be connected. I hesitate to disassemble it further.

I've got to believe it's an electrical issue, as when I place the engine on the track (either DC or DCC) there is no response. No noise. No light. No hum. No indication that it is receiving power.

I can return it for a refund, and only be out the shipping cost, but my real preference is to solve the problem and get it running. That's the stubborn engineer in me.

Any advice is greatly appreciated.

I'm looking for a replacement black interconnecting power cable for connecting the EZ Command controller, to a standard Bachmann DC controller. I've looked on the parts & service section of the website, and cannot find this part listed for sale. Any help would be appreciated.