Dear Bachmann,
I ser your new U P gp40 with sound is available .but for some reason your not showing the new model thay actually has a road number so all the dealers are showing the old pic with no road number and no flush fit cab glass and large lettering.I. plan to buy a few .but without seeing it I will wait and there is n lhs here.So are pictures available of the actual model your selling?
Thanks,  Pat

Dear Bachman,                                                         I have a dynamis system and after a year it developed a communication problem out of the blue.I chcked all th basics,then I did a web search and noticed the same issues by many users after around the same ammount of time of use.Everything in its enviroment is the same as it were since I purchased it new locatoon,lights,electrical.So there is aobvious problem and I was wondering where I would find the info on what it will need replace to make it work like it did rightout of the box?I liked the system before this.I cannot run trains .It works when it wants to only.I. can fix it myself if. I have the part that it needs that causes this issue over time

Dear Bachmann,  I seen that the new Dynamis system is available in the UK .It is not available in the US.Iam a current wner of the original system that had promises likea pc interface,the ability to use a reverse loop module that this system does not have.IS it going to be available soon.??Quite dissapointed that there are no upgrades for the orginal system in the US and the UK gets the new perfected version first  that covers all the issues that the original system has and it is a good system.THe new is what the original promised.I have supported Bachmann since the 80s and feel cheated.                    Thanks,Adam

Hello Everyone.
I have gotten back into model railroading after some years and had everything stored some old and used some still brand new old store stock that my friend gave me when he closed his doors of his train store in Michigan.
I have a few brand new Spectrum sd45 dcc ready engines that when taken out of the box for the first time the wheels fell out of one of the truck sideframes .I push it back into the side frame hole and it stays ,but derails all the time .The side frame moves up and down like it is too loose.
I took the bottom plate of the truck off to check the gears and for dried up grease ,all ok ,but the side frame has a square pins that slide into the round hole of the gear case and that is where it is loose.
I do not see a way to tighten it up .
Is this normal for the side frames with the bearings in them to move so much or am I missing something? I have 3 that are like this.

Thanks,
Adam