Jerry...

That is it !!!  Thank you so much...

Sorry guys, my mistake.....there are 3 connections on the Bachmann switch.
The connections are 1 on each end, 2 inputs per connection, and 1 connector on the long
side with 3 inputs.  On this one I connected it to the track modular connection.
That leaves me with the two end connections to connect to something...power??

Ok, then do I connect the other green wire (2 connections) from the switch to the AC or DC connection on
the power pack?

Tom

Evening Len,

Thank you once again for so much info.  I will be moving on with
my project.

Tom

Len,

I have 4 remote turnouts that come wired with a blue/green wire with a modular plug attached.  There is also switch included
with each section of track.  There are 4 connection points on each switch.  Where does the modular plug from the track
section plug into the switch?

Thank you

Tom

Len,

I will be working on this.  Do I only need a single power connection to the track?

It will be sitting on a 4X* sheet of plywood.

Thank you again

I have the beginners "your first railroad track pack".  I have a model 501 throttlepack H.O. train control.

Can you please direct me to where I can get drawing to where and how I can connect the power to
the track!  I need help here ...

Thank you for the aid and assist.

Tom