I carried ot the factory reset, without any joy.
The green light is solid on the reciever, but no other sign of life.

Thank you, I have done that and am awaiting a reply.

Yes, I have put a meter accross both outlets.
Unfortunately result is the same 0.05V.
Thanks for the reply

Thanks for the response.
My wall transformer is just a commercial 16v. DC model, without any provision
for adjustment.
It seems the problem is beyond the transformer, as the exit lead tests out at 16.6v on my meter.
Any further suggestions would be appreciated.

Hi, I  have just taken a E-Z Command System out of storage ( 3 years, with no betteries left in ), and am unable to get any power through the Command Station.
The centre light on the console is the only one which lights up. When I press stop on the handset, this light will flicker until stop is pressed again.
Handset speed control LED works OK, as do other handset controls, as best I can find out.
The User manual does not give me any joy, so can any-one out there please help me ?

Thank youBr 98.75 for the link to hoseeker.com
It also gave me some lists for ageing Lifelike locos I have.
Much appreciated. IanD

Hi. Is it possible to find on line, parts lists and drawings for an n scale Spectrum Loco, about ten years old. It appears to be an 86066 or possibly earlier.
It is a twelve wheeler with LMS 728, the only markings.
Unfortunately the box and original papers are long dissappeared.
Thank you for reading.
IanD

Thank you for your reply.
I have replaced batteries with new, have reset with stop button.
There is communication between the unit and the handset.
Units green light remains solid.
Handset appears to be functioning.
I have passed it over to my TV serviceman to see if he can find anything.
Expect it back tomorrow.

I reconnected my DCC system a few days ago, after it being in storage for a couple of years.
No power emerged from the unit. The transformer was supplying 15.5v, by my meter, buit
nothing was available from either track connections.
I assume this is a fault in the circuit board.
I would appreciate comments from members who have experienced a similar fault.
Also are replacement circuit boards available, and from where?
I live in Australia.
Thank you for reading
IanD