Thank you Johnathan, thanks for the info.                                                                      Thanks to all, Leo

Thanks for all the ideas, I will order an adapter to put in place of the decoder. But now I took out the decoder & forgot to mark position it came out of the 8 pin connector on the board, anybody know which one on the board is #1, it is suppose to be marked #1, but of course it is not. Thanks again folks, youve been great.

Thanks for a reply. No, I did not pull the decoder & put an adapter in place. I have 3 other loco's that run on dcc & dc without doing that exercise. I assumed that this didnt either. You know what they say about assuming . I will need to get an adaptor & try your suggestion. I will let you know how it went. Thanks again for your time.

Hi all, I have a bachmann factory equipped dcc santa fe northern 4-8-4, road #3783. I use a Dynamis dcc controller. The steamer just all of the sudden quit working, no lights, no forward or reverse. Tried it on dc, nothing there either. It is a ho unit, the track is ez stell. DC controller is also a bachmann, All the other loco's run fine. Any help would be appreciatted. Thanks