Coupler Help!

[GovB]

I have some Delton and LGB Reefers and would like them to match up with my Bachmann locos and rolling stock (both 1:24 & 1:20.3). Went to Kadee web site and still confused. Could someone tell me which Kadee coupler will do the trick? Or is there another answer?

Thanks, GovB

[jebouck]

KD 831 for truck mount
KD 830 for body mount
Are the usual replacements.
However different applications can apply.

[altterrain]

The Delton knuckle couplers should mate up with the Bachmann ones pretty well.

-Brian

[Loco Bill Canelos]

You can also get Bachmann couplers and put them on the LGB cars.  very cheap!

[Steve Stockham]

  You said you have Bachmann rolling stock in both 1:24 and 1:20.3? Is it possible that you meant 1:22.5 which is the scale of Bachmann's regular rolling stock and has couplers that are truck mounted the same level as LGB and Delton? The reason I ask this is that Fn3 (1:20.3) Spectrum cars are scaled quite a bit larger and have body mounted couplers that are at a different height! Bachmann makes a coupler that is offset so that a body mounted coupler will mate at the same height as a truck mounted one. If that is your problem then this might be your solution.