Hayes Bumpers Product Code: 44591

[[email protected]]

Does Bachmann make a Hayes Bumpers Product Code: 44591 that has a Power Terminal in the back end.

This would help wiring yards so that power can be removed while not in use.

Al

[THB-DAVE]

Use Terminal track clips and place them anywhere in the siding with a SPST
switch and you can turnoff the power. Available at all Model train shops for 2 bucks. All you need is one clip per siding and one insulated joiner.

Dave

[jayl1]

Atlas makes a terminal rail joiner - a rail joiner with a piece of wire already soldered on.

[[email protected]]

Thanks

Al

[grumpy]

There is usually enough rail projecting past the bumper that no connector is neede . Just solder to the end of the rails.
Don