K-27 battery R/C + sound version 4

[Tony Walsham]

I have just finished another Bachmann K-27 battery R/C + Phoenix P5 sound install.

This was done slightly differently again.
I fabricated a small sheet of 1.5 mm thick styrene to mount the ON-OFF switch, Charge Jack, Phoenix volume control and programming jack.

Here are the dimensions I used:



The plate is mounted under the front lip below the front of the coal load and avoids drilling any holes in the tender shell or chassis.



I used the RCS BIK-U3+VC which has a built in volume control switch.  However, you could use any sort of switch you wished.

[Gerryk]

I'm impressed...and totally new to sound.

Where's the speaker?

Gerry

[Tony Walsham]

Thanks Gerry.

The above is an update of this way of doing it.

http://www.largescalecentral.com/LSCForums/viewtopic.php?id=8976

I no longer use those 1/2 - 1 watt speakers since the Phoenix is capable of 2 watts output and killed one.