News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Bachmann decoders in other service

Started by SteamGene, June 16, 2008, 05:51:12 PM

Previous topic - Next topic

SteamGene

I know a decoder should work with just about anything, but will a Bachmann decoder, removed from a Bachmann DCC On Board locomotive work satisfactorily with another brand locomotive?  For instance, could I install one removed form a USRA light 2-10-2 and put it in a Proto 2000 SW-7/9?
Gene
Chief Brass Hat
Virginia Tidewater and Piedmont Railroad
"Only coal fired steam locomotives"

Hunt

It should work as long as
  •  The decoder is not damaged.
  •  The locomotive is not damaged.
  •  The locomotive does not draw more power than the decoder's rating.
  •  There is room to properly fit the decoder.

SteamGene

It's a small decoder.  OTOH, I haven't looked inside the SW yet.  May be even smaller room.  But I have no desire to add sound to my few diesels.
Gene
Chief Brass Hat
Virginia Tidewater and Piedmont Railroad
"Only coal fired steam locomotives"

Santa Fe buff

You should be able to do it, as long as you can fit it in there without it not meeting the requirments told.  But, it would add more realism, no matter, if you even run it or own it, and you have the stuff, you should add it.

Happy Railroading Gene!
- Joshua Bauer

kevin2083

I put a GP40 decoder/board in an Athearn GP38-2, no problem
______
|_____|
0|||||0   
||'-#'||

Santa Fe buff

- Joshua Bauer