News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Doubleheading 2 G scale 4-6-0 Annies

Started by PYROTECK1A, April 14, 2008, 07:38:12 PM

Previous topic - Next topic

PYROTECK1A

I have 2 G scale Yukon & White Pass locomotives that I would like to double head but the front knuckle coupler isn't operational nor is it at the proper height.
I'm brand new to G scale and would appreciate any tips.
Thanks

mhampton

I'd recommend getting a conversion kit from Kadee.  That way you'd have great operational couplers front and rear.

Mike Hampton

Paul W.

Pyroteck1A,
welcome to large scale trains. This topic has recently been discussed on the large scale forum. You should also post under that forum vs this one as you will get the answers from the folks that run these trains.
Happy Steamin'

Paul

Paul W.

Happy Steamin'

Paul

Tom Lapointe

Here's the conversion information direct from the Kadee website... :)

http://www.kadee.com/conv/b460bh.htm

You can use either the #791 (G-scale) or #1791 (#1-scale); the only difference is the physical size of the coupler knuckle.  The #1 coupler is slightly smaller, & a little closer to true scale; BUT the smaller size may make it more likely to "slip by" if you have any vertical grade transisitions, causing unwanted uncoupling. :o  The "G-scale" size (which is what I use) is larger & MUCH better  ;) in that regard, IMHO! :D

I have a couple of "YouTube" videos online giving demonstrations of Kadee use in Large Scale; my "Part 2" video specifically shows using Kadees to double-head an Annie (in my case, with a Bachmann Spectrum "Centennial" Mogul"). 8)

http://www.youtube.com/watch?v=3j4JCtZ_XM8

& here's Part 2, which includes the "Annie"...

http://www.youtube.com/watch?v=waYgHRMKdBU

Enjoy! ;D                                                                                     Tom

PS - One caution is that the standard heights for Kadee's are HIGHER than the stock Bachmann couplers on the "Big Hauler" series (such as the "Annies"); a "work-around" for this is to convert ONE end of a car to Kadee, & leave the stock Bachmann coupler on the other end.  This would permit you to still pull stock "Big Hauler" equipment. ;)  The newer "Spectrum" 1:20.3 cars (such as the 2 Bachmann hopper cars I'm using in the switching demo) have the Bachmann couplers already AT standard Kadee height, & a Kadee #830 is a straight "drop-in" installation into the Bachmann draft gear box.  On these cars, the Bachmann couplers WILL mate with the Kadees without modification. ;)