Coupler replacement for Spectrem 2-8-0 Connie

[geoff]

Hello group! I am sure somone must have addressed this issue already but I could not find it? I just received a new 1:20.3 2-8-0 and it is a beauty! However, the couplers are way too low for my rolling stock and the front coupler also sticks out too far! I would appreciate suggestions for replacing both couplers. Thank you........

[Phil Stump]

geoff, I have mine stored in the garage. I will get it out and look at the couplers and get back to you.[tommorow]

[geoff]

Thanks Phil

[glennk28]

Kadee 830 on the tender, Kadee 779 on the pilot. 
Or--Accucraft--which will also mount in the Kadee 835 box. 

gj

[Phil Stump]

Geoff,  Above is correct. Have a good one.   Phil

[Phil Stump]

I goofed   I was finally able to get into my garage [frozen lock] Mine has an 831 on the rear. sorry  Phil

[az2rail]

I used Kadee's 781 coupler conversion kit for the "connie". It raised the tender and shortened the pilot coupler. It is a G scale coupler. Bruce