News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

What Sound Systems Are Available In Bachmann PNP?

Started by tedyarbrough, July 03, 2021, 05:10:26 AM

Previous topic - Next topic

tedyarbrough

Friends,
With the new 4-6-0 currently shipping from dealers, what sound systems are currently on the market that will fit the Bachmann PNP socket? Any suggestions appreciated. Also, any experiences (good or bad) with these PNP sound systems.
Happy Rails (and 4th of July) To You,
Ted

mickeykelley

#1
I have several Phoenix systems and have been pleased.  They have one for the Bachmann PNP but I have not bought one yet. Planning on it for my C19 and Climax, but it is DCC and sound.

http://www.phoenixsound.com/products/SM18.html

Greg Elmassian

If you can find a used QSI, they are great (I have a lot for myself and will program them for anyone free).

The Phoenix is OK, it has some limitations, but mostly power, and the Big Hauler should be no issue.

I would not buy the Digitrax DG583 (I think that is the number)

The TCS Wowsound will work, the early versions were not great, I think they have improved the firmware.

I believe you should be able to buy one of the OEM SoundTraxx "quasinamis" that are derived from the Tsunami.


Greg

Visit my site: lots of tips and techniques: http://www.elmassian.com

mickeykelley

Greg, all the ones you mentioned above fit the Bachmann PNP socket?

Greg Elmassian

Uhh.... yes, I was replying to your question to the best of my ability.

You may want to do some additional research with the manufacturers directly, and also confirm the sizes since no one has reported the physical clearances around the socket.

Heaven knows what they tested it with, most likely the OEM Tsunami.

Greg
Visit my site: lots of tips and techniques: http://www.elmassian.com

tedyarbrough

Greg,
I have a QSI Aristo PNP. Do they fit the Bachmann PNP? Obviously, I have not tried it.
Happy Rails to you,
Ted

Greg Elmassian

Yes, but you will need to wire the chuff pins in the socket to the connector on the board. Probably need to double check that none of the other pins interfere, since Bachmann's implemention of the socket is after the QSI was designed.

If you get serious, like going to install, I'll look into it for you.

Greg
Visit my site: lots of tips and techniques: http://www.elmassian.com

StanAmes

If you are refering to DCC plus sound then Zimo and Phoenix are the only current out of the box plug and play production boards.

Using the dummy plug with wires almost all the DCC+ sound boards can be wired up so that they also are plug and play.

If you are refering to RC plus sound I believe there are a few others in the market that simply plug in.

Hope that helps

Stan

tedyarbrough

Friends,
It has been awhile. Any updates on best available PNP board for sound to work with the updated tender board on the 4-6-0?
Happy Rails To You,
Ted