News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

2 pin plug source for Spectrum HO K4 steam loco

Started by OlddManWithHO, February 22, 2021, 06:17:22 PM

Previous topic - Next topic

OlddManWithHO

All,

    Ordered a 2 pin plug with cable from Bachmann for my HO K4 loco tender.  The wires were pulled out when loco dropped to floor.

    The plug is too small.  Can not even pull pins out to swap with original plug because they are smaller than original pins.  Mine is brown and replacement plug is white.

    Wasted $11.  Anyone got a replacement suggestion?

Roger

rich1998

Have you called the Parts department for the proper part?
I had to do that about eight years ago, They sent me the proper pair of connectors with a bill.

Rich