News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Acquiring Locos inside Roundhouse

Started by hotrainlover, March 11, 2020, 09:59:50 PM

Previous topic - Next topic

hotrainlover

I have a 6 stall roundhouse.  What system do you all use to know which engine, is in which stall; to acquire a loco?  The house is too far to actually see into to read the numbers.  I have decals on the fixed open doors and inbound tracts for operators to choose.

RAM

In side of roundhouses was a big blackboard.  on this blackboard was a line for each track.  On this line was written information on needed repairs that needed to be made.  So you do the same thing.  If you only have 6 locomotive you just assign to a track and that is it. 

ebtnut

This is also the reason a lot of roads put the loco numbers on the backs of the tenders.  Anyone out in the turntable area knew exactly which loco was where.

Ton N


Piyer

On the edge of the layout, you could make a little turntable and stall diagram in white paint on a black background. Use blackboard paint for the black, and then you can just chalk the engine number  or decoder channel for the units in each stall.
~AJ Kleipass~
Proto-freelance modeling the Tri-State System c.1942
The layout is based upon the operations of the Delaware Valley Railway,
the New York, Susquehanna & Western, the Wilkes-Barre & Eastern,
the Middletown & Unionville, and the New York, Ontario & Western.