light mountain cv's

[plas man]

hi , just received my light mountain it runs on DCC , but the sound is out of sync with the speed and motion - is there a list of cv's for customizing ?   
thanks plas man

[spookshow]

It looks like Bachmann needs to update their "Parts, Service & Information" web page. There is a link for "Soundtraxx Decoder CVs", but it goes to a dead page on the soundtraxx website (https://soundtraxx.com/factory/bachmann.php).

-Mark

[plas man]

Mark thanks for the reply

plas man

[InsideTrack]

Thanks for letting us know about the dead SoundTraxx link. It is now live.

[Hunt]

If N scale 4-8-2 Light Mountain DCC Econami SoundValue decoder equipped – I just looked and it is not yet listed in the SoundTraxx website Bachmann page.

Use CV 114 to adjust the cadence of the exhaust chuff to match your locomotive's drive wheels rotation. Read CV 114 for starting value.  Higher value increases chuff rate  - lower value slows chuff rate.

Use programming on main -  Run locomotive without load on level track at the lowest speed the locomotive will run without jerking.  Once CV 114 is set the decoder will automatically adjust the cadence of the chuff to compensate for changes in motor load and speed.

[TJ]

Thanks for letting us know about the dead SoundTraxx link. It is now live.

All, One has to click the Home or any of the other links provided for >https://soundtraxx.com/home it will work.

TJ

[plas man]

thanks guys for the help

ST