DCC train set

[Rupa]

Muy name is Andres and I have 2 train set DCC. my question is how I must to connect ( 4 )  Standar Remote Turnout HO Scale ( Item Nº 44562 )
I understand that I need a separated Transformer to connect this. Wish voltage it mus be and in AC or DC. Do not forgete that I will use this in the DCC Set

Thack you in advance
   

[Razmataz]

I have a dcc track and I used the standard remote turn out. I took an old transformer from a no longer used electronics. ive heard them refered to on this forum as " wall warts" I cut the end off and used it to power the switch. this also works on dcc.
this website helped a lot https://ncedcc.zendesk.com/

[jward]

The switch motors will work on either AC or DC. Traditionally, they are wired to the AC terminals of a power pack, but if you have one with constant DC terminals you can use them as well. The important thing is to NOT use the variable DC terminals.

[Rupa]

Thank, but haw many Volts is the vest

[Rupa]

Sorry BEST

[Rupa]

Sorry for my English, I'll ask the question again. What voltage is the best in these cases (12 or 16 Volts)

[Len]

My experience has been 14-16V works best. 12V may work, but can get "iffy" if dust or dirt starts getting in the works.

Len

[Rupa]

Len, thank you very much

Andres