Problem to program a tsunami decoder for 2-6-6-2

[GermanBigboy]

Hello all,
I've bought 4 weeks ago a brand new Tsunami decoder AE32016 for the 2-6-6-2 loco. I exchanged it against the existing decoder. I'm not able to program the decoder. I'm using a Roco Lokmaus. A friend of mine has a ZIMO station and a Lenz station, but also no success. Is it possible that decoder is defect? Any help is appreciated.
Thanks

[dutchbuilder]

I have a Lenz controller and several 2-6-6-2's with and without sound,, factory installed, and i have no problems programming.

Ton

[GermanBigboy]

Thanks Ton,
but that doesn't help much. With the normal decoder (w/o sound) it's running fine. So how high is the chnace that the decoder is broken?

[dutchbuilder]

Can you read CV values on the programming track?
If it doesn't write or read on several brands of controllers i would say the chance is high that it was DOA.

Ton
Btw i can't find the number AE32016 anywhere.
can you tell me where to find that decoder?

[GermanBigboy]

Hello Ton,
thanks for the answer. We can read some CVs out but don't change them.
I found the decoder here:
http://estore.bachmanntrains.com/index.php?main_page=product_info&cPath=66_698&products_id=10466
I also bought the speaker that is listed.

Regards Holger

[dutchbuilder]

Holger,I Just opened one of my 2-6-6-2's with sound and I found the decoder you described.
Just a thought, have a look in the tech manual at CV 30 and CV 15 and 16.
Has to do with locking or unlocking the CV's.

Ton

[GermanBigboy]

Hello Ton,
I will try that and let you know the result. But it will take some time.
Thanks
Regards Holger