News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Connecting a USRA 4-8-2 loco to a N&W J-class tender

Started by bogie286, September 26, 2017, 02:02:10 PM

Previous topic - Next topic

bogie286

Hi all. I am in the process of customizing a USRA mountain to pull a J class tender. I am new to n scale and I reached out to Bachmann tech support who pointed me here. Could someone tell me if the wires in the harness from the loco will connect properly to the PC board in the J-class tender? I will be installing DCC/sound too.

Thanks!
Bill

Mike C

They may , the board in the tender should be marked beside the harness . If both tender boards are marked the same then no problem . If their different you could always cut the wires and hard wire to the tender pick-ups bypassing the tender board , or hardwire a decoder in if you are doing DCC .....Mike