News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Plugin interface board wires for Bachmann C-19

Started by Grapevine Flyer, December 23, 2016, 01:29:05 PM

Previous topic - Next topic

Grapevine Flyer

For the C-19, Bachmann includes a plug-in interface board which plugs into the 23 pin socket with many wires that you would use to connect to a DCC decoder. Does anyone have a list of which wires from here you would connect to a standard higher amperage NMRA DCC decoder?

I would appreciate it.

Kevin Strong

They should be labeled on the plug-in adapter board. At least they are on mine. If they aren't, here's the pin-out diagram.

http://www.bachmanntrains.com/home-usa/dwg/dwgs/LS_C-19.pin_assignment.pdf

All the documentation for the C-19 is on the Parts, Service & Information page on the web site here if you ever get stuck. It's very simple to use the wired plug-in interface to connect with a DCC decoder. I dropped a QSI decoder into the new Bachmann mogul for the product review; it took me all of 5 minutes to wire everything up.

Later,

K