News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Wiring diagram - 44213 controller to track

Started by eric5121, December 18, 2014, 02:08:42 AM

Previous topic - Next topic

eric5121

I have lost the red cable that goes to the track, and of course we lost the track connector as wewll. To make it work for Christmas I plan to build a cable and some alligator clips on the track. But I need a diagram or a simple explanation. Don't want to get the wires crossed!!

Radioshack should have what appears to be a 1/8" plug.

Chuck N

One wire from the power supply (+) post to one rail and the second wire from the (-) post to the other rail.  Make sure it is DC goint to the track.

Chuck

eric5121


Joe Satnik

Dear Eric:

3.5mm (1/8") stereo (TRS) plug:

Tip (NOT USED large scale) = HO/N/On30 AC out (to power E-Z Command)

Ring = Track Variable DC out

Shank = Common (AC return and Variable DC return)

In other words, wire the ring to one rail, and the shank to the other rail.

Hope this helps.

Sincerely,

Joe Satnik
If your loco is too heavy to lift, you'd better be able to ride in, on or behind it.