News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

#5 LH DCC trunout response, failed after relocation.

Started by atan5543, May 30, 2013, 08:46:58 AM

Previous topic - Next topic

atan5543

I moved a operational #5 EZ track DCC LH turn out to a new location. It noe doesn't respond either to the track button or to comand controller. I use a NCE
controller. Has and is working fine with my other 4 engines and nine turnouts. New installation looks fine.
What could be the reason that it now doesn't respond/work?
Al T

Doneldon

atan-

I suggest that you first double-check your wiring of this turnout. If that doesn't clarify things, check the manual operation of the turnout. It's possible that there's a piece of something which is jamming the points or flexing the turnout so it doesn't have free movement. If it still doesn't work, remove it from the layout and see if it functions sitting by itself, not connect to other track other than by jumpers to power and control it. Good luck!
                                                                                        -- D