News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

#5 turnouts and the EZtrack...snag

Started by Balrog21, April 27, 2013, 05:56:05 PM

Previous topic - Next topic

Balrog21

Am I just missing something here? Finally starting to expand and the turnout on the #5 switch when I try to add other EZ track to it it just won't fit....am I missing something here even the little joiner piece won't fit....or is it just time to take out the Dremel with the cutting saw blade and start making modifications? Or was it a packaging error and they put in the wron joiner piece?

Doneldon

Balrog-

Look underneath the roadbed on your turnout. You'll see a
defined area which you can easily cut or break out so you
can connect track to it.
                                       -- D

Jerrys HO

#2
John

The 2 1/4 piece that comes with the turnout has a line scribed in the side of it on both sides. Break the side that is going next to the other piece. This is to allow the other piece to join the other track where the straight and diverging section meet.
Hope this is what you are talking about.

Jerry

Balrog21