News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

2-6-6-2 wood tender load...anyone install it?

Started by Burlington Route, December 19, 2012, 03:22:14 PM

Previous topic - Next topic

Burlington Route

My son has requested that the 2-6-6-2 steamer be wood fired, so I removed the coal load {even though we're going to be pulling 6 "coal hoppers" behind it....hey, I'm just the hired help} and wondered if it's just supposed to sit on the bottom edge of that resin casting, or are we supposed to sand that thinner for a better look. I've just finished a black wash to add depth to the wood load stack or I'd toss up a pic of that bottom edge "step" all the way around the wood load casting.
Anyone?....

ChrisS

i used the factory one for a big, then i made my own real wood load. looks so much better and was just a quick evening to whip it out.

Burlington Route

1st time attaching a pic...let's see if it works the same here-


...the black base at the bottom is what I'm questioning whether to thin it up alot or what....BTW, yes, I repainted the wood too.