News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

DCC-Equipped 2-8-4 Berkshire Steam Locomotive

Started by jackbreadman1, December 13, 2012, 07:58:05 PM

Previous topic - Next topic

jackbreadman1

I have a DCC equipped 2-8-4 steam locomotive and I want to make it have sound, what would be the decorder needed to do this?

Jerrys HO

JB

This was posted some time ago. It should provide useful info from one of our great modeler's

http://www.bachmanntrains.com/home-usa/board/index.php/topic,16616.0.html

Jerry

richg

This is what SoundTraxx recommends. Store the link in Favorites. Look around the site for a lot of info on sound.
Decoders come with full instrructions.

Bachmann 2-8-4 Berkshire   TSU-1000 Heavy Steam   826103   810054/ 810110

http://www.soundtraxx.com/choose/step3.php?t=ho&s=Bachmann

The decoder does not come with matching 8 pin connector for the tender. You have to buy the eight pin connector and solder the decoder wires to it.
Get a 8 pin to 9 pin adapter.  You would only have to solder two wires to the speaker.

If you rip out the PC board, you have to do a bunch of solder splicing with shrink wrap around each joint, plus include a 1 k resistor for an LED.
Not all like to do this.
Below, is an explanation on how to do this if you are not up to much soldering.
Store his link and take time to look arounf if you are new to DCC. He has a lot on DCC and DCC with sound.

http://www.mrdccu.com/curriculum/soundtraxx/tsunami.htm

Rich