Caution for Bat powered Connie & K-27

[Barry BBT]

Have been converting a customer's Connie with my motor and gearbox.  In the process I noticed that the pickup plungers had been removed. This is normal practice on pickups applied to the backs of the flanged drivers, but here the suspension capacities have been reduced, which is enough to negate the suspension system and ride around with no active suspension; bottomed out.

This will also be the case on K-27s where the plungers have been removed.  Two springs are better than four, I think not.

Barry - BBT

[gunrunner]

hey barry, your mailbox is full

[Barry BBT]

Yes, I know.  It is not supported and will be going away.

[email protected]

623-936-6088

Barry - BBT

[rslater]

WOW Barry,I wish that was in the install instructions.  I installed one the first drives you made.  Now I know why the journals seem to bottom out.  At this point, I can't find the plungers and springs.  If you have 8 extras, please let me know, Bachmann does not have these parts.  My K still has them.  By the way, what happened to your  K conversion?

Richard
Wilmington NC

[Barry BBT]

Have no spares for the Connie (springs) or K-27, same springs.  I need to try KaDee.

Rod Edington came out with a cheaper solution to the K-27, than mine would have been.

Barry - BBT

[R and K RR Products]

  Richard,
I have some somewhere and I'll try to find them for you. Send me your mailing address and when I find them, I mail them to you. My e-mail address is   [email protected]

Barry
Thanks for the plug on the gearbox.

Rodney

[rslater]

Thanks Rodney,  Will e-mail you this evening with my address and needs.  Sounds like my K will be coming to you for the gear change.

Thanks
Richard