News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Bachmann DCC Easy Command and MTH locomotives

Started by krinor62, December 25, 2011, 05:59:39 AM

Previous topic - Next topic

krinor62

Hello!

I run MTH engines on my DCC system with your Easy Command DCC controller. The engines work fine, but I cannot change the locomotive address using the Easy Command controller. I follow the desribed programming steps to change the address which works fine with my Bachmann engines, but not with the MTH engines. The always stay on address 3.

Are there any special steps I need to follow?

Best regards

Krinor62


Jerrys HO

#1
krinor

Are you programming it on the track with no other engines on the track.
I have one MTH SD70ACE and it wanted to be alone for programming. Take all others off and try.
You will have limited functions available.

Jerry

Forgot to add the instruction manual has a misprint. Read this link by Jim
http://www.bachmanntrains.com/home-usa/board/index.php/topic,18439.0.html