News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

80 Ton Shay, DCC reprograming

Started by dbeer, April 18, 2011, 04:45:13 PM

Previous topic - Next topic

dbeer

I need to set the Shay DCC on board back to default.  I accidently reprogramed the loco number to 33.  I operates but without lights, bell and whistle.  I am not sure what I changed and don't have the means to read CV's.  My cab is a prodigy express.

richg

I use the NCE Power Cab. CV8 and enter 8. I then power down the cab and power up again.

Rich