News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Spectrum EMD F40PH Diesel #208 Amtrak

Started by bad, March 10, 2011, 02:19:46 PM

Previous topic - Next topic

bad

Recently inherited some trains and am new to this field. Do you know if this unit is dcc ready or not?

richg

Look at the diagram that came with the loco or open it up and see if there is a PC board that would have a eight pin connector on it.

Rich

Doneldon

bad-

No, it's not. However, Kato makes a plug in
DCC ready F40PH. There are several on ebay
right now.
                                -- D

bad


Jim Banner

The Bachmann F40PH is very similar internally to the Bachmann Baby Trainmaster.  Details of how to added a decoder to the latter can be found here:
http://members.shaw.ca/sask.rail/dcc/tmaster/tmaster.html

Jim
Growing older is mandatory but growing up is optional.

murfling

An easy way to tell if the Bachmann F40's are DCC ready, is to flip them over and look at the fuel tank. If its screwed on, its DC only....however, if its clipped on, its most likely DCC ready.