News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Who operates in....DC or DCC ?

Started by Tom Hogan, February 07, 2007, 08:03:59 PM

Previous topic - Next topic

WoundedBear

My layout is wired for both. An old MRC Tech II with momentum and an E-Z Command DCC from you know who. I really hope I didn't make the wrong choice with the EZC set.

Sid

kevin2083

I run my HO stuff in dcc, and my G, O, and N stuff in dc (well, ac with O). The N scale stuff I dont use often enough to need to convert, plus its a little too small for my soldering skills. My HO layout is the only "permanent" one, and is a 4x8 table plus a 2x10 shelf, connected by a hole in a wall-my dad was not very happy. I use the E-Z command system and run 5 locos. An athearn GP38-2 BNSF with the decoder from a Bachmann GP-40, Bachmann 70 tonner SP, Athearn S-12 painted for the CPLT with a MRC something decoder,an Athearn GP-7 MILW with the same type of decoder, and whatever DC loco I can get to work-usually an IHC 2-8-2.
______
|_____|
0|||||0   
||'-#'||