New Digitrax Zephyr Extra Can Program Tsunami Decoders without a booster

[darticus]

This has to do with the Tsunami decoder as regular decoders program fine without Blast mode. The Digitrax Zephyr Extra has a Blast Mode but the address changing is done on the mainline track. Will not program on programming track for address. You set the Zephyr into Blast mode and than program normally but in PAGE mode. Now we can program a Tsunami decoder without a booster.

[darticus]

Than it should work also. Ron

The old Digitrax Zephyr DCS50 like the new DCS51 has the Blast Mode. It is an undocumented feature of the DCS50.