News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

parts

Started by rye, May 01, 2010, 02:09:17 PM

Previous topic - Next topic

rye

mr bachman
i need the front truck and a new bottom plate or the 460 engine  the one that comes in the sets it is the  reading railroad one, the parts dept tell me i need to buy the hole bottom end, this is the three one that when bad broken mounts front truck fails crack bottom plate wires break any help thanks

Loco Bill

Hi Rye,

You can't get parts, here on the "ask the Bachmann" forum.   You should call Bachmann at 1-215-533-1600 and ask for the parts department.

Loco Bill,
Roundhouse Foreman
Missouri Western Railway

Unnofficial Historian of Bachmann Large Scale Products

rye

i did that as i said in the above fourm i dont want to buy a hole lower unit just thr truck and bottom plate thanks

Loco Bill

Sorry I should have read it better! Maybe someone will have what you need!
Loco Bill,
Roundhouse Foreman
Missouri Western Railway

Unnofficial Historian of Bachmann Large Scale Products

Barry BBT

Rye,

I have the pilot truck frames, but I use the bottomplate in my conversions.

How many pilot truck frames do you want?

Barry - BBT
There are no dumb questions.

Jon D. Miller

#5
rye,
I understand the part of your posting about needing a Pony truck frame. The second part of your request, I'm not real sure what you are asking for.

Could this be the part?





This is bottom motor block cover for a battery power/RC Big Hauler.  All the screw holes line up except the one at the very rear.

If this is what you are looking for you can have it no charge.  I may be contacted at [email protected]  and I'd need your mailing address to send it by USPS.


One of the "Enthusiastic Children"


JD
Poster Child (unofficial & uncompensated)