News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Problems with Large Scale Thomas.

Started by sleeping martyr, April 04, 2010, 10:39:12 AM

Previous topic - Next topic

sleeping martyr

Hi everyone.

I got a large scale Thomas for my son's birthday and we opened it up yesterday. However he doesn't run.  I took a multimeter to track and get power all around, but when i place Thomas on the track, the voltage drop is reduced to nothing.

I took some video and uploaded it here:

http://www.youtube.com/watch?v=ei4EQowAyLg

Can someone advise what else to check?

ZeldaTheSwordsman

Try checking Thomas, to see if something's wrong with him.

sleeping martyr

Quote from: ZeldaTheSwordsman on April 04, 2010, 04:42:08 PM
Try checking Thomas, to see if something's wrong with him.

I think it is obviously something with Thomas, however I don't know what to check on him.

Nathan

On the bottom black plate that covers the axles there are 8 small screws.  Remove them and see if there is a problem there keeping the wheels from turning or with the wiring.

If not there are 8 screws in the blue frame that will allow you to remove the cab and boiler.  There is a small circuit board on the back of the motor.  There are two wires that go to each side of the circuit board.  Also look at the area around the worm gear of the motor to see if there is anything keeping the motor from turning.

the Bach-man

Dear SM,
The easiest thing to do is return it to your dealer for a new one.
Sorry for the inconvenience!
the Bach-man

sleeping martyr

Ok, I've isolated where the short is. It is actually in one of the axles!

http://www.youtube.com/watch?v=ZTCeprBRSHE

sleeping martyr

alright, returned it to the store today, and got a new one... i had them check out the new one before i left and this one works!!

perhaps there is an insulating bearing or something missing from the axle?

Nathan

Hope your son has many happy years enjoying the model railroad hobby.