News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Parts Needed for EK 4-6-0

Started by stationmaster, April 01, 2010, 01:46:09 PM

Previous topic - Next topic

stationmaster

Looking to find parts for the Emmett Kelly 4-6-0. I purchased this train as new old stock from a gentleman who had owned a hobby shop. The engine is missing parts. The brake shoes were missing, and not in the parts bag. And the "guides" for the side rods that attach to the steam cylinder were also missing.

Any ideas where these items may be found? The missing parts do not affect performance of the engine, but do take away from the aesthetics.

Feel free to email me or contact me via PM. Email address should be available if you go to my profile. Or post here.

Thank you.

Bob

altterrain

The brake shoes are listed in the Bachmann parts store (where it says "Order Parts" on the left <==== )
http://estore.bachmanntrains.com/index.php?main_page=index&cPath=66_69_148

-Brian
President of

Barry BBT

Bob,

I have all that you need, and in some cases improved parts.

The brake shoes are the easy part.

I believe you are missing the crosshead guides.  If there are caps on the cylinders, but no bracket to contain the crosshead (attached to the mainrod), then you can use my metal crosshead guides, with instructions and templates to install.

Anything else you need I will probably have.

Contact me: [email protected]  or 623-936-6088

Barry - BBT
There are no dumb questions.