News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Another question about the 45-Ton Switch engine

Started by Arizona, May 10, 2007, 04:41:08 PM

Previous topic - Next topic

Arizona

I have the engine torn apart and now I need to know what side of the engine is the bell on?
Thanks, Bob

JerryB

Bob:

The bell is on the side opposite the control stand.

Happy RRing,

Jerry Bowers
Sequoia Pacific RR in 1:20 / 70.6mm
Boonville Light & Power Co. in 1:20 / 45mm
Navarro Engineering & Construction Co. in 1:20 / 32mm
NMRA Life Member #3370
Member: Bay Area Electric Railway Association
Member: Society for the Preservation of Carter Railroad Resources

Matthew (OV)

On this model, the bell appears on the fireman's side, which is, as described above, the side opposite the control stand in the cab, or the left hand side when you consider that the front of the locomotive puts the engineman on the right when moving forward.

It is, as you've discovered, possible to assemble the engine "reversed" as you've no doubt discovered, and there are examples of this locomotive's prototype where the bell is on the engineman's (right hand, same side as control stand) side ... so you can't really go wrong.

Matthew (OV)