News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Power pack for #6 crossover turnout switches?

Started by arbasu, December 29, 2009, 08:05:23 PM

Previous topic - Next topic

arbasu

What power pack do I need for #6 crossover turnout switches? I bought a set of #6s but did not realize I needed separate power packs as I thought by using the green wires to the tracks will also supply power.
Please help.

Thanks

Joe Satnik

#1
Dear arbasu,

Any power pack with an accessories output in the 12 Volts AC to 16 VAC range will work.

Some wall-wart transformers may fall into this voltage range.     

DC in those voltage ranges would work too, but in either case, to prevent solenoid meltdown, the button shouldn't be pushed for longer than a half second or so.   

The following power pack has 16VAC "push-insert-release" accessories terminals:

http://www.bachmanntrains.com/home-usa/products.php?act=viewProd&productId=209

I have available some new, never used, 44212 power packs from sets.   More details, send an email to joebarb"AT"wwt"DOT"net

Hope this helps.

Sincerely,

Joe Satnik

Edit: added "push-insert-release"



If your loco is too heavy to lift, you'd better be able to ride in, on or behind it.

arbasu

The track already has power can it not use it from there?
Are yo usaying I have to buy $50 power packs for these switches?
Please see the attached picture for my configuration.

Joe Satnik

That's MSRP.   Mine are certainly less.

As previously stated, you could find a spare/junk transformer with output in the 12 to 16 VAC range.   

In addition to supplying 16VAC Accessories power, the 44212 will also free up address 10 for DCC use when it is plugged into an EZ-Command station.


                                                 Turnout solenoid      Turnout solenoid
                                                         ^                             ^
                                                          l                               l
                                                          l                               l
44212                                        (3 wires)                     (3 wires)
Accessories output (2 wires)-->Slide/push button--->Slide/push button-->

Hope this helps.

Sincerely,

Joe Satnik
If your loco is too heavy to lift, you'd better be able to ride in, on or behind it.

Jhanecker2

The tracks are either powered from the Variable DC of a standard Transformer or the AC from a DCC  Control Center. In either case , the control switches of the Turnouts are powered from the  AC or accesories output of of a standard transformer . Are you running DC or DCC ?  If you are running #6 crossovers you may wish to wire both turnout switches together to throw turnouts similtainiously.

full maxx

I have this exact track layout with the exception of the crossovers have a 9" straight on both ends of them and both the 2-8-4 and the 2-8-0 will derail on both crossovers regardless of inside or outside oval when crossing over...all rail joiners are properly installed and the switches are completly thrown one way or the other... <a href="http://s211.photobucket.com/albums/bb165/nitroburnr/?action=view&current=IMG_8254.jpg" target="_blank"><img src="http://i211.photobucket.com/albums/bb165/nitroburnr/IMG_8254.jpg" border="0" alt="Photobucket"></a> 
look up FullMaxx1 on youtube or check the blog for the lastest updates  www.crumbsinmycouch.com

ABC

Do they appear to be picking the points of the switch? Are the lead and trailing trucks causing the problem or the drive wheels the problem. If the lead/trailing trucks are an issue consider adding a little weight and making other adjustments until you find something that works.

full maxx

it is the lead and trailing trucks and the tender
look up FullMaxx1 on youtube or check the blog for the lastest updates  www.crumbsinmycouch.com