News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

8000 series Spectrum rolling stock turning radii

Started by Cypress Hills, February 13, 2011, 03:12:40 PM

Previous topic - Next topic

Cypress Hills

Mr. Bachmann:

The new Bachmann 8000 series of rolling stock inFn3 scale caution their minimum turning radius is 8'.

These cars have the body mount Bachmann coupler with the clever trip lever.

If one were to substitue the other coupler that comes with the boxcar, flatcar, what have you, the one that's mounted to the trucks, will this change the turning radius to less than 8 feet?

JerryB

BAchmann specifies an 8' DIAMETER, not radius for these cars.

Radius is 1/2 diameter, thus the acceptable RADIUS is 4'.

Happy RRing,

Jerry
Sequoia Pacific RR in 1:20 / 70.6mm
Boonville Light & Power Co. in 1:20 / 45mm
Navarro Engineering & Construction Co. in 1:20 / 32mm
NMRA Life Member #3370
Member: Bay Area Electric Railway Association
Member: Society for the Preservation of Carter Railroad Resources

Cypress Hills

 Duuooh! Slapping myself upside the head.

Thanks Jerry, I should have spotted that but didn't. Cheers.

Cypress Hills