HO RS-3

[hsarch]

I purchase an new-old stock HO RS-3 on eBay but it did not come with operating instructions as to how to switch the locomotive between DC and DCC operation.

From searching the Board I see the included pin needs to be used but need instructions as to where it goes and how to install it.  Are there operating instructions available on-line from Bachmann?  I couldn't find them.

Any information would be greatly appreciated.

Thanks

[jward]

If you are referring to the dummy plug that converts it to DC only, look for the 8 pin receptacle the decoder is plugged into. Just unplug the decoder and insert the dummy plug and you're set for DC operation.