Track Pins

[Jhanecker2]

fxguy :  when you get the mating parts properly aligned    and fastened  dowel the mating sections but don't  glue the dowels in . This  should allow you to reconnect the sections more easily . John2

[jbrock27]

W/o a pilot hole, track spikes will bend once they hit the 2nd layer of the "sandwich" of a piece of plywood.

[Fxguy1]

After much advice on here I decided to use adhesive caulk instead of the pins.

[Danboone]

Was going to nail mine but I used hot glue on my EZ track and it has worked out pretty good. 

Just be careful around the turnouts