Wiring of lead truck on Big hauler 2-6-0 engine

Started by Agria, January 23, 2014, 05:21:25 PM

Previous topic - Next topic

Agria

Just received a replacement chassis for my 2-6-0 Baldwin big hauler engine.  Unfortunately the lead truck wires are broken off the truck.  Can anyone tell me  the red-black wire positions when the arrow on the truck points forward?  Don't want to get it reversed and cause a short.   Have my soldering gun out and I am ready to attach.  (I should really send it back to Bachmann, but I think I can get it working.) Thanks.

JerryB

Can you see to trace which wire comes from which side of the drive wheels?

If not, then use your volt-ohm meter (VOM) in continuity (resistance) mode to determine which wire goes to which side of the powered wheels. If you don't have a VOM, you might be able to borrow one, or you can get one at Harbor Freight for around $10. It will be handy for all manner of construction and repair projects.

Happy RRing,

Jerry
Sequoia Pacific RR in 1:20 / 70.6mm
Boonville Light & Power Co. in 1:20 / 45mm
Navarro Engineering & Construction Co. in 1:20 / 32mm
NMRA Life Member #3370
Member: Bay Area Electric Railway Association
Member: Society for the Preservation of Carter Railroad Resources

aspoz

#2
Are you sure you've got the right problem? There's a wiring diagram for the Indy here, http://www.bachmanntrains.com/home-usa/dwg/dwgs/G816X-IS001-2_WIRING_CONNECTION.pdf, and it doesn't show any connection to the pony truck.  Afraid I have converted mine to battery, and can't remember from personal experience.  The 4-6-0 Big Hauler has a pickup in the front 4 wheel bogie (wiring diagram here, http://www.bachmanntrains.com/home-usa/dwg/dwgs/LS_4-6-0_Metal_Gears.dc_wiring.pdf) and good advice on George Schreyer's site http://www.girr.org/girr/tips/tips1/big_hauler_tips.html.  Afraid I've never even handled the Spectum (old time) 2-6-0, and I can't see any documentation on line for it.

Steve

Loco Bill Canelos

#3
I am thinking you mean the 4-6-0, and not the 2-6-0.  This is not an elegant solution, but you could solder the wires on then try it, if it shorts out just put the arrow on the truck facing to the rear or resolder.  

Jerry's  way using the meter is the overall best way to solve almost every wiring related problem we face with our trains.  Recently Harbor Freight was putting out coupons which would give you a free multimeter with any purchase of another item.  Free is almost always good ;D

Cheers & Beers

Bill
Loco Bill,  Roundhouse Foreman
Colorado & Kansas Railway-Missouri Western Railway
Official Historian; Bachmann Large Scale
Retired Colorado RR Museum-Brakeman-Engineer-Motorman-Trainman
There are no dumb or stupid questions, just questions!