Lacking room for my plans of a 4x8, I decided to go with a shelf layout based on John Allen's famous Timesaver switching puzzle. The plan is based on a modification of Allen's original by Emrys Hopkins.
The excitement of the moment made me want to rush, and I kinda did–this part was done in 2 nights (~10 hrs.) with what general tools I had at hand. This ain't no pro job, but what the hell, a smidgen of realism is fine to be sacrificed for the sake of pride in accomplishing something!
First job was to cover the 1x6 ft. board with fabric. Easier than I thought it would be thanks to Mr. Staple Gun.
Laying the first strip of roadbed in place.
Nailing down the first strips. Remember, measure twice and hammer once!
The first 3 feet of roadbed in place!
After 3 more feet, with track put in place for testing (not nailed down.)
The Irish express engine was my test loco, and it ran perfectly in preliminary tests (aka Can't Wait to Run Trains Time!)
Percy poses at the north end.
My first real challenge–filling the gap between the switch and siding...
...so it's Mr. Atlas Super Saw to the rescue!
With a little grunt work, the first switch is down.
Obstacle #2–the crossing.
The crossing is set in place–albeit a tad crooked.
The south end of the yard after the first two sidings were down...
...and the north.
Overall view after 1/2 to 2/3 completion of the Clockmaster Mark I. What's going in that blank strip, you ask? Well...
...that's what these are for–two more sidings on a simple crossover.
Youch, that switch box is cramped! Better add some track in between.
Laying down the roadbed for the north siding, and adding support for the adjacent switch mechanism–the latter was done with all switches.
Some views of the double siding. Track and roadbed are (for) now complete!
Overall view.
An old Pannier tank pulls in with a goods while James shunts.
"Edward had warned Percy–'Be careful on the main line. Whistle to the signalman you are there.' "
So that's it for the moment! I plan to expand later when the switching possibilities here begin to tire me–lengthwise or forming an L. Scenery will obviously be added, perhaps a backdrop if I can swing it. What do you think?
The excitement of the moment made me want to rush, and I kinda did–this part was done in 2 nights (~10 hrs.) with what general tools I had at hand. This ain't no pro job, but what the hell, a smidgen of realism is fine to be sacrificed for the sake of pride in accomplishing something!
First job was to cover the 1x6 ft. board with fabric. Easier than I thought it would be thanks to Mr. Staple Gun.
Laying the first strip of roadbed in place.
Nailing down the first strips. Remember, measure twice and hammer once!
The first 3 feet of roadbed in place!
After 3 more feet, with track put in place for testing (not nailed down.)
The Irish express engine was my test loco, and it ran perfectly in preliminary tests (aka Can't Wait to Run Trains Time!)
Percy poses at the north end.
My first real challenge–filling the gap between the switch and siding...
...so it's Mr. Atlas Super Saw to the rescue!
With a little grunt work, the first switch is down.
Obstacle #2–the crossing.
The crossing is set in place–albeit a tad crooked.
The south end of the yard after the first two sidings were down...
...and the north.
Overall view after 1/2 to 2/3 completion of the Clockmaster Mark I. What's going in that blank strip, you ask? Well...
...that's what these are for–two more sidings on a simple crossover.
Youch, that switch box is cramped! Better add some track in between.
Laying down the roadbed for the north siding, and adding support for the adjacent switch mechanism–the latter was done with all switches.
Some views of the double siding. Track and roadbed are (for) now complete!
Overall view.
An old Pannier tank pulls in with a goods while James shunts.
"Edward had warned Percy–'Be careful on the main line. Whistle to the signalman you are there.' "
So that's it for the moment! I plan to expand later when the switching possibilities here begin to tire me–lengthwise or forming an L. Scenery will obviously be added, perhaps a backdrop if I can swing it. What do you think?