i have a bachmann 4-8-2 light mountain which had the same problem. I used a very small split shot sinker, hammered out very thin and then glued to the top of the pilot truck staying away from the wheels and making sure the pilot will turn. This added weight did the trick and have had no more derailments. Good Luck
- Welcome to Bachmann Online Forum.
News:
Please read the Forum Code of Conduct >>Click Here <<
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages1
#1
N / Re: N Scale 4-8-4 Front Trucks keep derailing
January 31, 2012, 11:58:43 PMi have a bachmann 4-8-2 light mountain which had the same problem. I used a very small split shot sinker, hammered out very thin and then glued to the top of the pilot truck staying away from the wheels and making sure the pilot will turn. This added weight did the trick and have had no more derailments. Good Luck
#2
HO / hardwire a decoder in a bachmann HO GE U36
February 06, 2011, 10:05:53 AM
Can anyone tell me how to hardwire this decoder in this engine?
#3
N / Re: dcc decoder installation in bachmann n scale 2-8-0 item #81154
June 23, 2009, 02:45:45 PM
Thanks for the step by step.....This I can do.....again thanks....
#4
N / dcc decoder installation in bachmann n scale 2-8-0 item #81154
June 22, 2009, 09:44:00 AM
How is the boiler shell removed so that a digitrax decoder can be installed? Any advise or diagrams will be appreciated. I have installed them in diesels but not in steam engines....Thanks for any help...
#5
N / Bachmann e-z controllers
January 02, 2009, 02:22:44 PM
What controller is needed to run the dc turnout switches with the e-z controller syster? I am setting up a new "N" scale system but need info on this DCC controller.....
Pages1