Hi Grumpy/Virginian.
Still pulling my hair out its not the tender trucks,will check what
Virginian Say but all other locos run though alright. why,
This loco run perfect on one circuit will not cross over.
Loco will not run on its own.
There are no wires from the plungers I think power goes though the chassis
Its time to pack it away
Many thanks all again

Hi Virginian and all
The loco set up is exactly as you say i have just cleaned the Plungers
they are tight on the drivers  (no look) should the loco move on its own
the only way I can get the drivers to move as i said before.

No problems with any other lLoco even the latest Spectrums Steam.
they are Great
thanks all Again Raymond..

Hi Modelerbob.
Your way works but it needs to be switched or it shorts out on the two
controllers,its a lot of work for one loco I have more than one crossover,
Ill wait and see if any thing can be done to loco.
Thanks Again Raymondo.

Hi all
Today I have managed to get the loco Wheels to turn with out the Tender
Only off the track, A set of wires from a controller,. one wire to the Drive
Wheels and the other Wire to the drawbar not the normal way to test
a loco. what next
Thanks Raymond

Hi Modelerbob and all
You are right but there is power on from another controller for the
loco section.
Will check grumpy reply.
Can I say Thanks to every One who have replied Its my first time on
any forum im amazed.
Thanks Again Raymond

Hi Guilford Guy. Thanks.
I think you are right all i can see are two plungers onto the Drivers
No Wires to motor .
The Power seems to come from the tender through the metal coupling
bar for tender i expect its more pick ups off the engine.

Thanks Again all for all your help Raymond

Hi
its not a reverse loop set up,
I have 4 Main line  ovals divided by insulated joners also at least  20
Diesel/Steam loco that are no trouble.
This loco stops across the double crossvers  i can only see pick ups on
tender. I just cant think what it may Be. . loco bought As new.

Hi ta152HO. Thanks
Im new to any forum so here we go.

Loco Running on DC.
Runs perfect For/Rev on one oval of track will not cross over to another oval
or new circuit .
Ps recentlly purchased 5 New Bachmann Steam Locos no problems.
Thanks Raymond.

Hi there all
Another American Model Railroader from the U/K nothing in particular
though,
Just purchased a 4-6-2 Rivarossi Southern off that great auction site.
It runs purfect on one circuit but will not cross from one circuit to another
just stops I see the pick ups are on the tender any ideas.

Many Thanks Raymondo