Hi Roger If the loco is going in opposite direction try reversing the decoder it maybe backward Ken Black

Thanks Rich I got the rear light to work pipe not connected  the front does not work  Thanks Ken

It Is factory installed loco runs in right direction Could it still be backward ?

Yes I have used 0 but the lights do not work is there another cv I can use Ken

I have a new bachmann 2-10-0  dcc and tsunami sound I can not get the head light or the rear light to work  ken

ok i will reword my question how do you replace the light?

I have a bachmann 2-10-0 with a high head light that needs replacement is this a easy fix

I have 28mm speakers they are too big for the sy 2-8-2 tender and too thick the 2-8-2 tender is smaller than a 2-8-0 tender

The 28mm is too big for the small 2-8-2 tender has anyone put a speaker in this tender

Hi Roger I have use the MRC decoder with a 28mm speaker for my heavy mountain works fine It all fits in the the long tender with no problem If you want to see it give me a call Iam not far away Ken

Thanks I have one works great What size speaker would you use?

I have a bachmann sy mikado 2-8-2 ddc ready I am looking for a sound decoder and speaker that will fit in the tender does MRC make one?

I got a replacement 2-8-0 from bachmann it ran about 10 feet and then stopped  noticed it was out of QuarterSo I phoned bachmann they happily sent me a replacement New one arrived same problem I think I will fix this one myself Anyone else have this problem It seems the wheels are loose on the gear shaft causeing them to turn independent of each other in other words the right can slip without the left moveing I put them back in Quarter a used lock tight  works fine now Ken

Thanks Johnathan Your pictures and instructions are great felt like you were right here helping me Thank You Ken

I use a noma power supply for outside lights I have put a dimmer switch in the curcuit a head of the supply so I can dim the lights I have over 40 lights. I use old automotive lights from dash boards free from my auto wrecker also use the holders they 2 copper strips you can solder wires to and place under your buildings